Posts

Halogen spots replaced by Led

Image
Read in this manual how you can easily replace your old halogen spots with LED. To see which LED lights you need, you must first see which fitting your spot has, as follows: 1. Switch off the electricity so that you can safely remove the old spot. 2. Take the halogen spotlight out of the fixture/ceiling by bending the two pins of the ring together and turn or pull the spotlight out. GU10 halogen spots replaced by Led If you have GU10 halogen spots, you can read below how they can be replaced by  LED spots GU10  1. Switch off the electricity. 2. Once you have removed the old halogen spot, you can immediately screw the new Led GU10 spot into the fitting. 3. Reattach the Led spot with the iron ring. 4. Switch on the electricity again. You see well, you don't have to do anything else! It is only a matter of removing the old spot and the new Led spot. So you can easily save 90% without needing any technical knowledge. New LED spots ...

Switch to Led TL lighting

Replace fluorescent tube with LED fluorescent tubes There is huge growth within the LED fluorescent lighting. More and more companies are considering replacing their old fluorescent tubes with Led. Because the LED lamps are undergoing major technical improvements, it is becoming increasingly interesting to replace fluorescent tubes with LED lighting. Wondering if it is also interesting for you to switch? then read on! Why switch to Led? It may seem like a big step to switch to Led. This is also certain, the purchase price is higher than normal TL and moreover, the TL tubes must be replaced. The latter is especially a challenge for industrial buildings with high ceilings. In addition, Led is relatively new, many companies do not yet use Led lighting and are therefore skeptical about the quality.  Thanks to the interesting specifications of our LED lamps, we can relieve you in all areas! Payback time TL LED lighting Switching to LED fluorescent lamps can be seen as an i...

What color is daylight TL

Daylight TL Many applications require daylight fluorescent colors, such as in warehouses and offices. This color has several advantages such as the high light output and the positive influence on staff. But what color should I have to come closest to the fluorescent daylight color and how much Kelvin is daylight? Confusion about daylight fluorescent color how much daylight Kelvin is, there is a difference of opinion about that. It is also not easy to determine, the color of daylight is of course very different at sunrise than at full sun. The color in full sun is equal to the color code to 865 (is equal to 6500 Kelvin), or the cold-white color Led TL tubes at Led Wereld. This color is pure white, without a yellowish tint. As soon as the sun is a bit lower, the color tends more towards color code to 840 (equal to 4000 Kelvin), this color is also called clear-white or neutral-white. Now the question is still what color daylight fluorescent tubes you should choose in order to c...

The ideal office lighting: LED panels!

Image
Office lighting LED Offices are usually equipped with suspended ceilings and fluorescent fixtures. These fluorescent fixtures consume a lot of energy, the fluorescent tubes flicker and you can also make beautiful steps in terms of design. Led panels offer the solution for Led office lighting. Our LED panels fit precisely into the system ceiling, making replacement very easy. The entire fluorescent fixture can be slid out of the system ceiling and the new LED panel can function as LED office lighting ! Benefits of LED panels Save on LED lighting office By switching to LED panels, you save a lot of energy. A 60 × 60 TL fixture with four 60 cm TL tubes consumes around 90 Watt in its entirety. The fluorescent tubes use 4 x 18 = 72 watts and the VSA add 25% to this. The LED panel 60 × 60 Pro uses only 36 watts. This saves you no less than 60%! The via of the old fluorescent tubes is no longer used either. The LED panels are fully recovered after approximately 1.5 years! This ...

All advantages and disadvantages of Led TL lighting at a glance

Image
LED lighting has completely swept aside the conventional lighting market for a variety of reasons, in particular, lower energy consumption, longer life, and lower maintenance costs.  By 2030, the US Department of Energy expects that Led lighting will save 190 terawatt-hours of electricity.  This equals no less than 15 billion dollars a year!  Now that the prices of LED lamps continue to fall, more and more companies are switching to LED. Advantages of LED fluorescent lighting It is already known to most that Led offers great benefits. These are the most important: Led saving Fluorescent lighting is a widely used form of lighting. Due to the relatively low energy consumption and high light output, LED fluorescent tubes are ideal for illuminating large spaces such as warehouses, sheds, and workplaces. LED fluorescent tubes use more than 50% less energy than conventional fluorescent tubes. The most commonly used fluorescent tube, 150 cm, has a power of 58 wat...